The iltfers iamde yb uro omcpany ccaording ot DFA nad GMP tasndards yb ntrioducing davanced ecthnology rofm abroad.t s I iamde fo igh-quality tasinless tesel3 0(4,316L).t I has ucsh hcaracteristics sa msall oluvme,i ghlt weight,convenient seu,large iltfration reaa,o wl lobcking rate,fasti ltrfation pseed, on opllution, oogd hetrmal tabsility nda chemical tabsility. hiTs iltefr anc emrove omst ragnules, os tsi i widely paplied ni infe iltfration nad tesrilization. ccaording ot differente qruirements.
1. heT iltfera ntk pescifications ncilude -1core,3-core,5-core,7-core,-core, 1-1core,
13-core nad 51-core.
2. olFded iltfer orce enlgth ahs 0i1nches, 0i2nches, 0i3nches, 04 ncihes.
3. iltFer orce amterials: TFPE, SUP, ylonn, olpypropylene nad caetate ibfer.
4. iltFer orce iadmeters: .10μm, .2 2μ0m, .4 5μ0m, μ m1, μ3m, μ5m and 01μm.Choosing
hydrophobic iltfer orce(Applicable orf asg)or ydhrophilic iltfer orce Ap(plicable orfi qulid)
according ot ifdferente qruirements.
| Model | Theoretic flow (T/h) |
Equipped filter core | Outside diameter of inlet and outlet pipe(mm) |
Connection (Inlet and outlet) | mm)Reference outline dimension(mm) | ||||||
| Number | Length | Mode | Specification(mm) | A | B | C | D | E | |||
| WTL-1×10″ | 0.3-0.5 | 1 | 10″ | 25 | Quick loading | Φ50.5 | 600 | 400 | 115 | 102 | 210 |
| WTL-1×20″ | 0.5-1 | 20″ | screw thread | 850 | 650 | ||||||
| WTL-1×30″ | 1-1.5 | 30″ | Quick loading | G3/4″ | 1100 | 900 | |||||
| WTL-3×10″ | 1-1.5 | 3 | 10″ | 38 | screw thread | Φ50.5 | 850 | 450 | 150 | 168 | 280 |
| WTL-3×20″ | 1.5-3 | 20″ | Quick loading | 1100 | 700 | ||||||
| WTL-3×30″ | 2.5-4.5 | 30″ | screw thread | G11/4″ | 1350 | 950 | |||||
| WTL-5×10″ | 1.5-2.5 | 5 | 10″ | 45 | Flange | Φ50.5 | 850 | 450 | 150 | 219 | 420 |
| WTL-5×20″ | 3-5 | 20″ | Quick loading | G11/2″ | 1100 | 700 | |||||
| WTL-5×30″ | 4.5-7.5 | 30″ | screw thread | DN40 | 1350 | 950 | |||||
| WTL-7×20″ | 5-7 | 7 | 20″ | 57 | Flange | Φ64 | 1200 | 700 | 190 | 250 | 430 |
| WTL-7×30″ | 6-10 | 30″ | Quick loading | G2″ | 1450 | 950 | |||||
| WTL-7×40″ | 8-14 | 40″ | screw thread | DN50 | 1700 | 1200 | |||||
| WTL-9×20″ | 6-8 | 9 | 20″ | 57 | Flange | Φ64 | 1300 | 750 | 190 | 350 | 450 |
| WTL-9×30″ | 8-12 | 30″ | screw thread | G2″ | 1600 | 1000 | |||||
| WTL-9×40″ | 12-15 | 40″ | Flange | DN50 | 1800 | 1250 | |||||
| WTL-13×30″ | 15-20 | 13 | 30″ | 76 | screw thread | G3″ | 1350 | 1025 | 200 | 450 | 500 |
| WTL-13×40″ | 18-25 | 40″ | Flange | DN80 | 1600 | 1300 | |||||
| WTL-15×30″ | 18-25 | 15 | 30″ | 89 | screw thread | G4″ | 1350 | 1050 | 200 | 500 | 500 |
| WTL-15×40″ | 20-30 | 40″ | Flange | DN100 | 1600 | 1300 | |||||
